Xbox360 Dvd drive doesn't work?

PLEASE HELP:---
MY XBOX DRIVE DOES NOT OPEN AND SAYS :--
OPEN TRAY OR UNRECOGNIZED DISC.

-----------
OK.
If your xbox 360 is giving you error messages, open tray, unrecognised disc, or it wont read the disc at all, noting seem to work and you have tried to clean the drive with a dvd lens cleaner. Then clearly the disc drive of the unit is faulty and would need to be replaced.

Replacing a drive on this xbox360 is not as simple as one might think, the old drives firmware has to be read on a Desktop computer - the drive must be connected to a desktop computer with a VIA sata chipset- That is not a recommendation, that is REQUIRED, to get a special key. Then you need to take the new drive and connect it to the computer as well read its firmware and modify the key it contains to match the original.

if this is not done, the new drive will not work on the console, you will get a error code on the screen contact support.

as you can see this is major operation and is very far from simple.

It would be best for you to send this unit to Microsoft for repair. Or do you think you could do it? there is a high chance of ruining a dvd drive if you press the wrong button and flash it with the wrong firmware or if something else goes wrong. I've done it myself, and I can assist you if needed.

To get help - repair from Microsoft call

* Toll free: (800) 4MY-XBOX or (800) 469-9269
* Direct dial: (425) 635-7180 .


------------
THANK YOU.
----------------

CMOS battery on the mother board?

PLEASE HELP.

WHERE IS CMOS BATTERY LOCATED ON MOTHER BOARD.ITS ACER TRAVELMATE2700.

-----------------------

OK.

your bios battery is soldered into the mainboard, its under the keyboard, next to the modem board and the bios chip itself.

In order to get to the battery you would first have to dissasemble the laptop, remove the keyboard, power buttons, and the top of the machine. You may also have to remove the display if its holding the top of the cover in place.

Removing the battery is no guarantee of reseting the password. You need to study the bios chip and find out which pins of it you need to short in order to reset its memory. In some cases the password might be stored on another chip.

-----------------------

THANK YOU.

--------------------

how to make changes in scanned document?

PLEASE HELP.
 IS THERE ANY WAY TO EDIT SCANNED FORM.
I HAVE SCANNED  FORM AND NOW I WANT TO CHANGE FEW THINGS IN THAT FORM.
MY SYSTEM IS OFFICE 2010
----------------
OK.
OCR programs take the TEXT out of a picture, they do not reconstruct a form for you to fill out.
.You have to have a program that has OCR which means Optical Character Recognition. The programs are not included in MS office.
Google OCR programs.

-------------

If it is a text document you have to scan it using an OCR program. Office XP had built in OCR support but 2010 does not. If it is a picture I recommend you use a program called GIMP. It is free and runs well. You can scan and save the picture in several different formats allowing for manipulation inside Office or other photo editing software.

-----------

Before doing this you have to use an OCR program (Optical Character Recognition). With this software you will be able to convert your scanned document in a Word format document, so you will be able to edit it with the Microsoft Word. 

what you want to do, is not possible. Only way to properly write on a form, is that you have the original digital computer version of it, sure you can scan it, but you can not use / write on the same way. Sure you can use the computer to ADD text into the form, if you scan it as a picture, and then use the Microsoft paint program to add text on the fields. But its not the same as having the original digital form to write on.

---------------------

THANK YOU.

---------------------